Friday, February 13, 2015

Underwood Electric: A new cord

My friend Dennis in the Physics department kindly installed a new power cord for the Underwood Electric, replacing the tatty Underwood cord. Nothing to it, Dennis says. Me, I still don't understand electricity.



Now we're nearly there!

There was a moment of dismay because when we turned the machine on, it wouldn't stop advancing the platen again and again. What was wrong? Dennis tracked it down in less than a minute: one little spring had come unattached. The guy has an eye! I would have figured it out ... maybe in an hour.


11 comments:

  1. That machine just looks sexier every time I see it.

    ReplyDelete
  2. This is going to look brand-new, isn't it? Even with the "aged" key legends. A centerpiece of your office, for sure.

    ReplyDelete
  3. Nice to see it was upgraded with a proper grounded cord, with a sealed three-pronged plug. Good job!

    Hmm... just thinking. Does the machine have a built-in fuse or a breaker somewhere along its electric circuit? If not, perhaps this could be a good time to include one in the live (blue?) cable, replacing that twist-connector. This would protect the motor in the event of a power surge or a short circuit. With an old machine whose big motor could be hard to replace, and with all the hard work you've put refurbishing it, maybe a little fuse could be a worthy addition.

    ReplyDelete
  4. Very nice work. I see he used an IEC cord too.

    ReplyDelete
  5. I can't wait to see it when it's finished!

    ReplyDelete
  6. I'm finding this rebirth really therapeutic!

    ReplyDelete
  7. Bravo! more and more magnifico!

    ReplyDelete
  8. Mothers of the gods! Look at the size of that motor! Surely the dreadnought of typewriters.

    ReplyDelete